JD Macdonald Triumph Commercial High Speed Hand Dryer in Satin
TRI-Umph hand dryer is a state-of-the-art, ergonomic, high-speed unit. With air blowing down and back from vents on three sides, users dry their hands in 12 seconds, in a comfortable and natural position without water splash-back.
JD Macdonald 10-20200-2 Triumph Commercial Hand Dryer Features:
Triumph over germs: Ultra hygienic - Over 99% of airborne bacteria and particles as small as 0.3 microns are eliminated with the removable Super Filter System: HEPA filter, Carbon filter and Anti-microbial filter. Anti-microbial silver ion treatment added to the ABS cover provides an additional layer of germ protection.
Triumph over time: Fast drying time of about 12 seconds, with air from vents on three sides. It is easy to maintain - Super Filter System is easy to clean / replace when needed and the narrow design of the top half of the dryer allows the unit and the back wall to be easily cleaned.
Triumph with ergonomics: You can easily dry your hands in the same natural position that they were washed, meaning there is no need to bend your knees.
Triumph over water: Water from hands is pushed backwards onto an absorbent and continuously evaporating ceramic plate. For any water that is not evaporated or absorbed by the plate, it is channelled into a drip tray rather than the floor.
Triumph over vandalism: The hand dryer can only be removed using a dual step security system, offering enhanced vandal resistance. The reinforcement back plate is internally secured to the wall mounting unit.
How It Works:
User puts hands horizontally into the unit
User can rub hands if desired
Air blows out automatically from three sides, drying hands in about 12 seconds
Water is atomised and any excess droplets are pushed back onto the absorbent/evaporating ceramic plates
JD Macdonald 10-20200-2 Triumph Commercial Hand Dryer Specifications:
Operating Volts: 240V, 50/60Hz
Watts: 1200W with heater on; 750W with heater off (450W heater element)
Warm Air Temp. Output (when heater is on): 50c MAX at 21c ambient room temp
Motor Type: 1 HP, 20 krpm MAX, brush type dual ball bearings
Motor Protection Thermostat: Auto resetting thermostat turns unit off at 95c @ 240V
Heater Safety Off: 85c
Drying Time: About 12 seconds
Circuit Operation: Infrared automatic
Sensor Range: 120mm - 10mm
Timing: 2-second hold-on; 60-second auto shut-off
Noise (Decibel) Level: 65 dB-A MIN to 69.8 dB-A MAX @ 2M
Air Speed: 234 km/h {65 m/s} - 360 km/h {100 m/s}, adjustable by owner
Air Flow (Volume): 55 - 76 CFM (89 - 124m3/h)
Cover Finish: ABS plastic with silver ions (satin look)